SPEAK WITH A LIVE REPRESENTATIVE MONDAY - FRIDAY, 8AM-5PM ESTOR EMAIL TEAMRAE@REMANAUTOELECTRONICS.COM
Your cart is empty!
This is a new calibration resistor for the pump mounted driver (PMD) on the 6.5L GM diesel injection pump. This sets the maximum fuel delivery volume of the fuel injection pump. This product slides right in to the connector of the PMD. #5 is the most common and #9 is the highest calibration resistor available, with the greatest increase in fuel delivery. This will give the vehicle a little extra power when at wide-open throttle. The difference in resistance level is often very minimal during...
This is a new fuel pressure regulator for common rail fuel injection pumps. These are also known as MPROP's. The symptoms of a faulty MPROP would be rail pressure that is too high or too low.The MPROP will often fail before the pump does, getting stuck and causing the symptoms mentioned above.
This is a Remanufactured Bosch fuel pressure regulators for common rail fuel injection pumps. These are also known as MPROP's. The symptoms of a faulty MPROP would be rail pressure that is too high or too low.The MPROP will often fail before the pump does, getting stuck and causing the symptoms mentioned above.
This is a Remanufactured Bosch fuel pressure regulators for common rail fuel injection pumps. These are also known as MPROP's. The symptoms of a faulty MPROP would be rail pressure that is too high or too low. The MPROP will often fail before the pump does, getting stuck and causing the symptoms mentioned above.
Remanufactured 6.7L Common Rail Cummins ISB Engine Control Module (ECM) These units cover Light Duty and Medium Duty fleet vehicles, including Cummins powered Dodge trucks. All ECM's are fully remanufactured, undergoing decasing, inspection, component reman, and tri-temperature tested under operating loads at thermal extremes. ***** We will not be responsible for custom tuning/programming that results in damage to the ECM software. If you install a custom tune/program and it corrupts the...