Original Stiction Eliminator will stop excessive black smoke and bucking and chugging on cold starts. It not only cleans injectors but other parts of the engine as well, including the turbocharger.
Scientifically formulated to eliminate the stiction build-up that causes most injectors to fail. Pour one treatment of our Original Stiction Eliminator into your oil BEFORE replacing your injectors. In less than 4,000 miles you will see, hear and feel the difference as your injectors come back on line. And you’ll save thousands of dollars by not replacing injectors that weren’t broken to begin with!
When used in conjunction with Diesel Extreme (fuel additive), your engine will regain its original performance power. Recommended for ALL diesel and gasoline engines, even without symptoms like failing injectors, stiction is being made.
To increase the efficiency in modern diesel engines, manufacturers have increased the pressure at the tip of the injector. This increase provides for a better, more efficient burn with added power. Older injectors would put out 1,200 psi at the injector tip but the new diesel engines put out 26,200 psi at the tip. To achieve this increase in pressure, the manufacturers had to tighten the tolerance inside the injector. This increased the friction and temperature. The higher temperatures have a burning effect on the engine oil. A layer of oxidized oil and additives form, slowing down the injector and eventually stopping it altogether.
Originally created for International Truck and Engine, Stiction Eliminator is a formula made from a combination of detergents and dispersants, which can be added into new or used motor oil. Hot Shot’s Secret Stiction Eliminator then works to remove build-up caused by the coking and varnishing left behind from overheating the engine’s oil.
Typical Applications and Mixtures:
Recommended for ALL diesel and gasoline engines. We recommend using with a fresh oil change, ideally with a full synthetic motor oil. Hot Shot’s Secret Stiction Eliminator is made up of 100% additives so it can stay in the oil for the entire oil change.
Directions:
For initial cleanup please refer to the initial treatment chart above. For a maintenance dose use only half the recommended initial amount. Remember: the amount of Stiction Eliminator that is added replaces the same amount of engine oil. Be careful not to overfill.
If you have a diagnosis of a failed injector, then Hot Shot’s Secret Stiction Eliminator will fix this problem, even if the injector is at the point of not working. Stiction Eliminator is a combination of detergents and dispersants that clean up the carbon and oxidation inside the injector. It also contains additives that make the motor oil work better. Friction modifiers and viscosity improvers make everything run smoother, with less friction and acid neutralizers help to prevent the built up soot in your engine oil.
We have been testing Hot Shot’s Secret Stiction Eliminator since 2004. Trucks having problems were hooked up to a diagnostic computer and tested. Computer analysis showed anywhere from 1 to 6 injectors needing replacement. A treatment of Hot Shot’s Secret Stiction Eliminator was added to the engine oil. The trucks were run only 100 miles and then the computer analysis was repeated. 86% of the time, the analysis showed all the injectors were back online. The owners noticed more power and a smoother running truck. The other 14% of the trucks showed improvement also. Most of the time, the diagnostic analysis showed that 4 injectors needed replacement before treatment. After Hot Shot Secret Stiction Eliminator was added to the engine, the analysis consistently showed only 1 injector needing replacement.